So I've run the reader in both modes, and this is what I've got
Please chip in if you have any pointers.
- Code: P2002 - Particle Filter Efficiency Below Threshold - I've cleared the error, and I'll refill with new diesel and see if it comes back
- Code: B2477 - Module Configuration Failure / Module: All Wheel Drive Module - I have done some googling and have noticed the car either misfiring at about 2500 RPM in 2nd gear around when the turbo is spooling.
- Code: B1317 - Battery Voltage Too High - The previous owner had mentioned it had a new alternator recently, and there are receipts for a new instrument cluster. I'll have to do some more digging into this with a multimeter.
- Code: C1278 - Steering Wheel Angle 1 and 2 Signal Fault - I'll try to reset everything on ABS and see if it comes back.
- Code: B1318 - The battery voltage level is too low. - Module: Antilock braking system - Like above, I'll try a reset.
- Code: U1900 - CAN communication bus fault - All the backlinks on the forum appear to be broken, so I'll do some more hunting.
- Code: B2976 - Control line to EAH open circuit or short to ground -
Control line to EAH open circuit or short to ground
Please chip in if you have any pointers.
