Ford Kuga Owners Club Forums banner
1 - 3 of 3 Posts

·
Registered
Kuga '67' & Kuga '18'
Joined
·
7 Posts
Discussion Starter · #1 ·
Very long story short!
Made my own thread after asking advice on someone else's.

Had a 3.0 sync system, android auto never worked. Hubby had 2.3, my phone always worked in his car. I downgraded my 3.0 to 2.2 ready to upgrade to 2.3.
2.3 wouldn't install and kept failing, downloaded 3.0 from ford tried to install. After an hour I had to remove the USB and go to an appointment. Also needed to upgrade my maps from 6.1!

Come back, sync screen dead, no power to USBs. All gone. Tried fuses, no go.

Since had an auto electrician out and he's tested it all on forscan, there was an error for the apim. He cleared it and reset the apim module and the fault didn't reappear. The screen now appears to power on then you hold on&skip. He said there is power going to the whole system and he thinks its a software issue.

Please help me! 🙏
 

·
Update Ninja
Vignale 2019, Platinum White
Joined
·
3,962 Posts

·
Administrator
Ford Kuga 2013 Titanium X
Joined
·
2,014 Posts
Hi @EmilyP92, welcome to the forum.

It sounds like it's been mid-install when you pulled the USB.

Send me a PM, and I'll talk you through some options.
 
1 - 3 of 3 Posts
Top