Ford Kuga Owners Club Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
Hi does anyone have information on how to activation of reverse camera with forscan?

any advice welcome

Regards Dave
 

·
Registered
Joined
·
155 Posts
Dave this may help...... borrowed from a thread on here.....
- Go to the APIM As-Built
2- Do a backup of your original APIM (just in case)
3- Change block 7D0-01-01 x*xx-xxxx-xxxx
*=3 With camera no PDC
*=9 No camera with PDC
*=B With camera and PDC

Paul
Ps dont forget to back up your APIM before you write...... :) :)
 

·
Registered
Joined
·
63 Posts
Discussion Starter #3
Thanks Paul, set up today all working as it should, when I carried our the camera connection I found that pin 14 & 15 on the APIM connector was already populated so I tapped in to the existing wires and all seems well.

Thanks for pointing me in the right direction.

Regards Dave
 

·
Registered
Joined
·
155 Posts
Great.... glad i could help Dave..... You're very welcome..... 😊😊
 
1 - 5 of 5 Posts
Top