Ford Kuga Owners Club Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
40 Posts
Thank u all for ur time and answers! Not trying to do smth that i will regret, just wanted to know about, i reed some articles online and here i know there are ppl with knowledge about this kind of stuff “ was curious if its true that the 6F35 auto trans could also work as powershift and also that the gear shifting would also improve

PS: most of my modules were not active by standard default from Ford, i activated myself, i asked at Ford bay about to enable specific modules and they said i dont have it installed, i checked aso myself and interesting it worked like magic lol! Thats why i wanna learn few things( there is the saying “ u may be using ur car with the hand brake on without even realizing it”( metaforic speaking ofc))
 

·
Registered
Joined
·
40 Posts
By now you will have realised you don't "play" with Forscan if you don't know what you are doing.
there's enough advice here to ensure you log off and shut the laptop. Or....change it to manual and watch the gearstick and clutch pedal appear.
This was best comm ever, anyway ur absolutely rite👍
Firstly you only choose what your car is. It is also wise to save a back up of your current car's configuration so when Forscan says would you like to save your current configuration, save the profile and save it somewhere safe where you can find it again.

I have a question. Is Kuja29 and Robert Nastase the same person. You are only allowed one profile on here
@kuja29 @Robert Nastase
Yes kuja29 and Robert Nastase one and the same person 👍
 

·
Registered
Joined
·
40 Posts
Firstly you only choose what your car is. It is also wise to save a back up of your current car's configuration so when Forscan says would you like to save your current configuration, save the profile and save it somewhere safe where you can find it again.

I have a question. Is Kuja29 and Robert Nastase the same person. You are only allowed one profile on here
@kuja29 @Robert Nastase
Yes all the time im doing backup , but here is about just one setting not the whole module, wanted to know if someone maybe has advanced knowledge or even did it and how did the trans behaved!?🙏
 

·
Registered
Joined
·
40 Posts

·
Registered
Joined
·
40 Posts
Where abouts in the world are you?.

There are 2 Powershift variants, a 6DCT250 dry clutch used in some small engined petrol Fords (which was a disaster basically) and the 6DCT450 which was used with a 2l Petrol engine early on (very rarely), the majority were mated to the 1.5 and 2l Diesel engines.

The Kuga never came with a Petrol Engine and a Powershift 6DCT450 in the UK.

If your car is equipped with the 6F35 Torqe Converter Automatic telling the PCM or Central Configuration it has a Powershift is daft at best, saying that maybe give it go and let us know how you got on?.
im from Turkey, and yes the central configuration says that my 6F35 auto trans could also be powershift(could it be posiible?), this was my dillema, but ofc i dont want to do that change without knowing what could happen, its not like enable another module or smth like that its allitle ''sensitive'' :D
 

·
Registered
Joined
·
40 Posts
Simply put, it is not possible. The BCM module will show all the options that are stored within the software. When the car was built it will then be programmed to the specific transmission in that car.

I would not attempt to change it. Best case, car throws an error message, worst case the transmission gets wrecked would be my opinion.
i was thinking the same just wanted much more oppinions ofc, it shows all the values in the software, thk for ur time and answer have a nice day
 
  • Like
Reactions: jlawes20389
1 - 8 of 8 Posts
Top