There is a gap of about 1 cm between the bottom of each headlamp and the trim panel below it on my car, and I can't say that I had noticed it before I changed the bulbs to the brighter xenon ones.
Can anyone confirm that there is quite a large gap, or have I refitted the lights incorrectly?
If the fixing screw hole on top of the headlight unit is in the same place, and the beam pattern is still similar to how it was before, you've probably got it right. There is a small gap just below, not quite big enough for my pinky to get in.
Hi,
I have an 09 MK1. I have discovered that my throttle body does not mate fully with the intake manifold, causing the engine to judder at 2k revs and high load (air/fuel mix off)
I have taken the TB off and the checked the housing (100% intact), the seal ring is solid and I surmised that...
hi ive had a problem starting my Kuga 2.0L Tdci of the past week and its getting worse. the engine turns over but it won't fire. I tried to see if it was the glow plugs but they seemed fine. I did know if it was something to do with the fuel pump as it doesn't sound like it priming.
This is posted for @KugaHelen who cannot post a message in Technical
-----------
Afternoon,
Having a few issues with our 2010 2.0L diesel. Its done 67Kmiles. Driven 20 miles daily to work, and we don't follow the silly green arrows and drive it more like a petrol. It gets a good hard run...
Hi.
My father bought a used 2011 kuga titanium S about a month ago.
He has been experiencing that the car sometime refuse to unlock when pressing on the fob, but it unlocks the driverdoor with keyless entry, without any indication of doing so (the indicators dont flash, the interior lights dont...
Hi I purchased a 2009 kuga 2.0 tdci awd 3 months ago and it has developed a vibration/shudder under hard acceleration in 6th gear between 60-70 mph it doesnt do it if you accelerate gently. I can only describe it as the same sort if noise as if you are driving over rumble strips on the motorway...
A forum community dedicated to Ford Kuga owners and enthusiasts. Come join the discussion about performance, troubleshooting, reviews, maintenance, and more!
