Ford Kuga Owners Club Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
  1. hi i am wondering how to remove the dash trim so i can test the boot release switch, has anyone done this or got any pictures, before i start to prize and damage any plastic bits, thanks in advance.
 

·
Registered
Joined
·
401 Posts
Peter your best bet is to use the search engine on here to see if anyone else has placed some details about what your about to do.
Chance's are that there could be a section about dash removal.
Good luck matey.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #3
hi yes thanks tried that not much luck, i dont think anyone has had an issue with the switch or heated screen switches which is on same panel
 

·
Registered
Joined
·
120 Posts
Peter
I think you may have to remove the center console..... you could try popping the gear stick gator off to see if you can reach up
 

·
Registered
Joined
·
2,275 Posts
Have you checked for faults with ForScan? It may have some faults stored, especially if there's more than one switch at fault. It may even be able to tell you/ visually log the switch state as you operate them.
 
1 - 5 of 5 Posts
Top